N95 Respirators: Types, Filtration and Limitations

N95 respirators are commonly used in healthcare and other occupational settings, and can also help reduce exposure to airborne particulate matter found in wildfire smoke and air pollution. However, not all respirators are designed for the same applications. Differences in construction, fluid resistance, fit and other features can affect where a particular model is appropriate.

In this article, we explain how N95 respirators work, compare different respirator types and their applications, and examine the airborne particles they can help protect against. We also discuss their limitations and how to wear an N95 respirator correctly.

What Is an N95 Respirator?

N95 respirators are tight-fitting respiratory protective devices designed to reduce the inhalation of airborne particles. The term N95 refers to a NIOSH respirator classification. “N” indicates the filter is not resistant to oil, and “95” indicates a minimum filtration efficiency of 95% under specified test conditions.1

Unlike loose-fitting medical masks, which primarily provide a barrier against respiratory droplets and fluid splashes, N95 respirators are designed to form a close seal around the nose and mouth. This seal helps prevent unfiltered air from entering around the edges. Inhaled air is directed through the specialized filter material, which captures airborne particles as the wearer breathes.1 Although medical masks can filter some particles, their loose fit does not provide the same level of protection as a properly fitted N95 respirator.

What Are the Types of N95 Respirators?

N95 respirators share the same minimum particulate filtration classification but may differ in design and additional protective features. Although these respirators share the N95 filtration classification, additional features like fluid resistance for healthcare applications and exhalation valves for comfort affect their suitability in different settings.1

Types of N95 Respirators Characteristics Typical Applications Filtration and Resistance
Standard N95 Respirator Tight-fitting, disposable respirator with NIOSH-approved particulate filtration.* Healthcare, construction, manufacturing, maintenance and other workplace settings.

Protects against certain airborne biological particles:

  • Virus- and bacteria-containing aerosols
  • Dust
  • Smoke
  • Mists
  • Metal fumes
  • Fine particulate matter, including PM2.5

Does not provide fluid resistance against liquid splashes and sprays.

Surgical N95 Respirator Combines NIOSH-approved particulate filtration with fluid-resistance, flammability and biocompatibility requirements. Healthcare settings where respiratory protection and exposure to blood, body fluids or other potentially infectious materials may occur.2

Same particular filtration as other NIOSH-approved N95 respirators, plus:

  • Fluid resistance: Helps protect against specified liquid splashes and sprays, including blood and other potentially infectious body fluids.
  • Flammability: Meets requirements for resistance to ignition and flame spread.
  • Biocompatibility: Materials are evaluated for cytotoxicity, skin irritation and allergic reactions during intended use.
N95 Respirator with Valve Includes an exhalation valve to potentially improve comfort during extended wear.  Certain construction, industrial and other occupational environments.

Same particular filtration as standard NIOSH-approved N95 respirators, but:

  • No source control: The exhalation valve allows unfiltered air to escape, potentially releasing respiratory particles into the surrounding environment.
  • No fluid resistance: Does not protect against liquid splashes and sprays.

*NIOSH (the US National Institute for Occupational Safety and Health) is the federal agency responsible for testing and approving respirators under US respiratory protection standards. NIOSH-approved N95 respirators must meet established performance requirements, including a minimum particulate filtration efficiency of 95% under standardized testing conditions.3

How Do N95 Respirators Work?

An N95 respirator’s filter material consists of layers of fine fibres that capture particles through a combination of mechanical and electrostatic filtration mechanisms.3,4

  • Diffusion: Very small particles move unpredictably as they collide with surrounding air molecules. This random movement, known as Brownian motion, increases the likelihood that they will come into contact with and become trapped by a filter fibre.
  • Interception: When particles travel through the filter with the airflow, they can pass close enough to a fibre to touch its surface and become captured.
  • Inertial impaction: Larger particles have greater inertia and cannot always follow the airflow as it changes direction around the filter fibres. Instead, they continue along their original path and collide with the fibres.
  • Electrostatic attraction: The filter fibres carry an electrical charge that helps attract and capture airborne particles. This provides an additional filtration mechanism alongside the physical capture processes.

These mechanisms operate simultaneously, with their relative contributions depending partly on particle size and airflow conditions. Together, they allow N95 filters to capture airborne particles across a wide range of sizes.3,4

What Do N95 Respirators Protect Against?

When properly fitted and worn, N95 respirators can reduce exposure to several types of airborne particulate contaminants, including:

  • Fine particulate matter (PM2.5): Inhalable particles with a diameter of 2.5 micrometres or smaller, commonly found in wildfire smoke, vehicle emissions and other forms of air pollution.
  • Inhalable particulate matter (PM10): Inhalable particles with an aerodynamic diameter of 10 micrometres or smaller, including PM2.5 and larger particles such as certain types of dust and pollen.
  • Biological aerosols and particles: Airborne particles that may contain infectious agents, including viruses and bacteria, as well as mould spores and fragments.
  • Construction and industrial dust: Airborne particles generated by cutting, drilling, sanding, grinding and handling certain materials. Examples include wood dust, concrete dust and other non-oil-based particulate matter.
  • Metal fumes: Fine particles produced when metals are heated, melted or vaporized during welding, soldering and metalworking.
  • Smoke and combustion particles: Airborne particles generated by burning materials, including wildfire smoke and certain industrial combustion processes.

Some environments contain a combination of particulate contaminants and gases or vapours. N95 respirators filter airborne particles but may not provide adequate protection against multiple respiratory hazards. As with any personal protective equipment, respiratory protection must be selected according to the specific contaminants, their concentrations and the conditions of exposure.

N95 Respirator Limitations

Although N95 respirators filter a wide range of airborne particles, they are designed for particulate filtration and do not provide protection against gases, chemical vapours or every type of airborne contaminant. In particular, they do not provide protection against:

  • Carbon monoxide (CO): A colourless, odourless gas produced by incomplete combustion, including vehicle exhaust and certain industrial processes.
  • Ozone (O3): A reactive gas found in outdoor air pollution, formed through chemical reactions involving nitrogen oxides and volatile organic compounds in sunlight.
  • Nitrogen oxides (NOx): Gaseous pollutants produced during combustion, including emissions from vehicle engines and industrial equipment.
  • Volatile organic compounds (VOCs): Organic chemicals that can evaporate into the air, including benzene, toluene and various solvent vapours.
  • Chemical vapours and acid gases: Gaseous contaminants such as chlorine, ammonia, hydrogen chloride and sulphur dioxide, which require appropriately selected respiratory protection.
  • Oil-based aerosols: Airborne droplets or particles containing oil, such as lubricating oil mist, cutting fluids, hydraulic oil mist and mineral oil aerosols. N-series filters, including N95 respirators, are not resistant to oil and should not be used where oil aerosols are present. R- or P-series filters may be appropriate, depending on the exposure conditions and required level of protection.

How to Properly Put on an N95 Respirator

Proper use of medical masks and respirators begins with understanding the wearing requirements specific to each type. For N95 respirators, this includes proper positioning, achieving a secure facial seal and performing a user seal check before use. Even a respirator with highly efficient filter material cannot provide its intended level of protection if it's not fitted properly or allows unfiltered air to enter around the edges.1,2,5

  1. Select the Right Fit: Make sure you are using the correct size and model for your face. Respirators come in different shapes and sizes, and a model that fits one person may not provide an adequate seal for another.5
  2. Inspect the Respirator Before Use: Check that it is clean, dry and undamaged. Do not use it if it is dirty, damp, torn, has stretched or damaged straps, or shows other defects that could affect its fit or performance.1,5 
  3. Position the Respirator: Place the respirator over your nose and mouth, extending it underneath your chin. The nosepiece should sit across the bridge of your nose. Please note that facial hair can interfere with the seal and reduce protection. Facial hair should be shaved or trimmed very short to ensure direct skin contact with the respirator.
  4. Position the Straps: Always follow the manufacturer's instructions. Many N95 respirators have two headbands, with one headband placed above the ears and the other below them at the back of the head, rather than around the ears.
  5. Adjust the Nosepiece and Straps: Using both hands, mould the flexible nosepiece around the bridge of your nose, if directed by the manufacturer. Ensure the respirator sits snugly against your face without noticeable gaps. Avoid pulling or adjusting the respirator in a way that distorts its shape or compromises the seal.
  6. Perform a User Seal Check: This helps identify air leaking around the edges.2 Depending on the respirator design, the manufacturer may specify a positive-pressure or negative-pressure seal check. Not all respirators support both methods. If you detect air leaking around the nose, cheeks or chin, readjust the respirator and repeat the seal check. If you cannot achieve a proper seal, try a different size or model.

Important: A user seal check is not a substitute for a formal fit test. In occupational settings, applicable regulations or workplace respiratory protection programmes may require fit testing to confirm that a specific respirator model and size provides an adequate fit for the wearer.

Key Takeaways for Using an N95 Respirator

N95 respirators can provide effective protection against a range of airborne particulate hazards when the correct model is selected, fits properly and is worn consistently. Before relying on an N95 for respiratory protection, keep the following points in mind:

  • Choose an appropriate respirator: Check that the respirator is certified to a recognized standard applicable to its intended use. In Canada, look for a NIOSH approval number (e.g., TC-84A-XXXX) or a CSA-certified respirator marked CA-N95 in accordance with CAN/CSA Z94.4.1. 2,5 You can verify also NIOSH-approved models using the NIOSH Certified Equipment List.
  • Check the fit and condition: The respirator should form a snug seal around your nose, cheeks and chin. Perform a user seal check every time you put it on. Check for dirt, damage or deteriorated components, including worn straps. Replace the respirator if it becomes damaged, dirty or difficult to breathe through.1
  • Understand its limitations: N95 respirators filter airborne particles but do not protect against gases or chemical vapours and are not resistant to oil-based aerosols.
  • Reduce exposure whenever possible: Use appropriate ventilation and other engineering controls to reduce airborne contaminants. Select respiratory protection, appropriate to the specific contaminants and exposure conditions when additional protection is required.2

FAQs

Both provide N95 particulate filtration when properly fitted and worn. Surgical N95 respirators also meet additional requirements for fluid resistance, flammability and biocompatibility, making them suitable for healthcare applications where exposure to blood, body fluids and other potentially infectious materials may occur.

Yes. N95 respirators help reduce inhalation of airborne particles that may carry viruses and bacteria, including respiratory particles released when an infected person breathes, speaks, coughs or sneezes. NIOSH-approved N95 respirators must achieve a minimum filtration efficiency of 95% under standardized NIOSH test conditions. However, although they reduce exposure, they cannot eliminate the risk of infection.

Yes. A properly fitted and worn NIOSH-approved N95 respirator can help reduce exposure to fine particles in wildfire smoke, including PM2.5. However, wildfire smoke also contains gases, such as carbon monoxide and volatile organic compounds, which N95 respirators cannot filter. An N95 can therefore reduce exposure to the particulate component of wildfire smoke but does not provide complete protection from all smoke-related pollutants.

No. N95 respirators filter airborne particles, not gases or chemical vapours such as carbon monoxide, chlorine, ammonia or solvent vapours. Although they may filter certain particulate fumes, such as metal fumes, they do not protect against gases released during the same processes. Chemical hazards require respiratory protection specifically selected for the substances and exposure conditions.

An N95 respirator should fit snugly over your nose and under your chin, with no noticeable gaps around the edges. Follow the manufacturer's instructions and perform a user seal check every time you put it on to identify potential air leaks around the nose, cheeks or chin. If you notice leakage, readjust the respirator and repeat the check. If you cannot achieve a secure seal, try a different size or model.

References

  1. Health Canada. Medical masks and respirators: Information for users. Ottawa (ON): Government of Canada; 2024 Jun 12. Available from: https://www.canada.ca/en/health-canada/services/drugs-medical-devices/masks-respirators/information-users.html
  2. Canadian Centre for Occupational Health and Safety. Respiratory protection against airborne infectious agents for healthcare workers. 2024 Mar 22. Available from: https://www.ccohs.ca/oshanswers/ prevention/respiratory_protection.html
  3. National Institute for Occupational Safety and Health. N95 Respirators and Surgical Masks. NIOSH Science Bulletin. 2009 Oct 14. Available from: https://www.cdc.gov/niosh/bulletin/2009/ respirators-and-masks.html
  4. Intra P. The critical influence of particle charge neutralization on surgical mask and N95 respirator filtration efficiency. J Electrostat. 2026;140:104246. doi:10.1016/j.elstat.2026.104246.
  5. Public Health Agency of Canada. Masking: Types of masks. Ottawa (ON): Government of Canada; 2024 Oct 4. Available from: https://www.canada.ca/en/public-health/services/publications/diseases-conditions/types-masks.html